Відео

You are commenting on the wrong video. And thanks for sharing your opinion but sadly stencil thickness EOM and smoothness RZ value can be digitally measured and a person coating with one hand cant come close to someone coating with two hands and some sort of screen holder. This is a scientific fact and the reason large shops use fully automatic as manual coating is inconsistent but at least using a wall mount and screen hold we can try to control the variables vs one handed which is the simplest and most unreliable method coating.

@rabindra142 this was plastisol ink

We private label a premium SBQ emulsion, kolormatrix.com/hirez-pink-sbq-emulsion.html

@sheltonmoreland1589 Thank you, glad you enjoyed it!

@bigdap100 if you prefer plastisol ink, I would recommend International Coatings or Advantage. If water-based Matsui prints beautifully thru the mesh.

@@dubworth You were a pleasure to have in class 😀 Thanks for sharing your experience 🙏

You're welcome, glad we could help. :)

Yes, the dri-vault holds 12 and the dri-cab holds 10. I did mispeak on the dry times. Dri-Vault is 30 minutes but the Dri-cab is 3 hours. Thanks for sharing!

Thank you! Cheers!

Thank you, cheers!

Thank you!

🥰

Thanks a million, glad you liked it!

@murksbasics sadly you can't do 4 color process on a dark tshirt without a white underbase. So you would 5 to print

@@KOLORMATRIXAtlanta interesting, how did you make the cheetah print on your page? You used 2 colors and two neutrals

@murksbasics simulated process was used for cheetah print. Sim process uses opaque colors but can be up to 9 colors, depending on the color gamut of the design

Occasionally I hear of a dealer salesperson recommending 1/1 or even just 1 stroke but general rule of thumb 2/1 or 2/2 for consistent EOM from all the major manufacturers that I have been to their tech training class. Saati just setup their Automatic screen coater in our classroom and the default is 2/1 or 2/2 with all their emulsions. Except for High Density then we 2/4 or 2/8.

Epson T3270 24" roll printer, running all black inks and Accu-RIP software, printed separations from Adobe Illustrator

Thank you, glad to hear!

Many thanks

Higher mesh counts, at least 20 newtons tension and 15 to 20% eom stencil thickness, printing on white shirts 230 mesh, printing on dark shirts with white 155 to 230 mesh.

@@KOLORMATRIXAtlanta very thanks my bro,higher mesh counts and tension can lead to lower ink ,is that right？btw,what is 15 to 20% eom stencil thickness?

They have upgraded the unit since this video and the new time is approximately one hour. But It does vary by temp and humidity in the shop, as it isnt using heated air, Thanks for asking

Glad you liked it, Thanks for the support.

These are just highlight videos from open house. We will be working on indepth training videos as well.

Thank you, my friend🙏

We are in Atlanta GA, our website is www.kolormatrix.com

Thank you! We appreciate you sharing your opinion!

Guilty as charged! 😆

Thank you

Glad to hear and Thanks for sharing 👍

Great question,.how much does it cost print a shirt manual vs automatically. Dont.be blinded from one perspective. If your doing weekly $1k, 10k, 100k 250k bagging is a small expense or major expense.

Plus that can work 24/7

u weird af. How is this video relate to Chinese?

There Where?

This artwork actually came to use from a Japanese artist, he had already separated the artwork, so all we had to do was print it.

Screen printing does seem to get into ones blood, so your not alone in missing it. Check out your local screenprinting tradeshows or open houses at dealers to play a little. Thanks for sharing your experience!

Thank you! And Merry Christmas

Your welcome 🙏

Usually they will be old frames and then you are just buying someone else's problems. If newer frames and really tight, snap them up at that price.

I see. Thanks.@@KOLORMATRIXAtlanta

Yes the roll is a little expensive because you have to buy it by roll. I have some mesh that is 3 years old and hasn't changed color and still works.